Frequently Asked Question

1. There is a plug in transformer that connects to the 600 Control Interface, ensure that it is plugged into outlet and that connecter is plugged into the 600 Control.

2. If there is not A/C power coming from outlet then a wiring change must be made.

3. If there is no D/C power coming from transformer then replace transformer.

B. If 600 Control has display but conveyor will still not move.

1. Ensure that inverter interface has power. There is a “POWER” LED on the inverter interface, located next to the inverter, to indicate that power is available for the system. If this LED is not lit, check that the power cord for inverter interface is plugged in.

2. If there is not AC power coming from outlet then a wiring change must be made.

3. If there is AC power coming from the outlet, ensure that the inverter has a display. If there is no display then contact White Conveyors Inc. If there is an error on the inverter display then refer to the error code list to determine the error.